Cisco-SPA112/Cisco-SPA122 IP-phone setup

1. To enter gateway web interface enter device's IP-address in the URL bar. You can attain the device's IP address by dialing ****110#

Default login and password: admin

2. Open Voip - SIP and specify range of RTP ports.

RTP Port Min: 1024

RTP Port Max: 65455

3. Open Voip - Line1 and enter the following data:

NAT Mapping Enable: no

NAT Keep AliveEnable: yes

Proxy: sip.zadarma.com

Proxy: pbx.zadarma.com

Register Expires: 300

Display Name: Your sip number (for example 111111) from personal account

UserID: Your sip number (for example 111111) from personal account

Password: Your password of sip number, from "SIP Connection" of personal aacount.

Display Name: Your internal PBX number (for example 1234-100) from personal account

UserID: Your internal PBX number (for example 1234-100) from personal account

Password: Your password of internal PBX number from personal account

Preferred Codec: G711a

Second Preferred Codec: G711u

G.729a Enable: yes

For correct work of incoming call transfer in IP PBX, set following parameters:

DTMF Tx Method: auto

DTMF Tx Mode: normal

To save settings click Submit