D-Link DVG-2102S setup

1. To open gateway's web interface enter the device's IP-address in the URL bar.

PC should be connected to gateway's LAN port. Default IP address is 192.168.8.254

Username: admin

Password: (no password by default).

Open "Setup" tab "VoIP Setup" and enter the following data:

Enable Support of SIP Proxy Server / Soft Switch: check this box

ITSP Name: sip.zadarma.com

Number: Your sip number (for example 111111) from personal account

ITSP Name: pbx.zadarma.com

Number: Your internal PBX number (for example 1234-100) from personal account

Register: check this box

Invite with ID / Account: check this box

User ID / Account: Your sip number (for example 111111) from personal account

Password: Your password of sip number from "SIP Connection" in personal account.

Confirm Password: Your password of sip number from "SIP Connection" in personal account.

Proxy Server IP / Domain: sip.zadarma.com

Proxy Server Realm: sip.zadarma.com

SIP Domain: sip.zadarma.com

User ID / Account: Your internal PBX number (for example 1234-100) from personal account

Password: Your password of internal PBX number from personal account

Confirm Password: Your password of internal PBX number from personal account

Proxy Server IP / Domain: pbx.zadarma.com

Proxy Server Realm: pbx.zadarma.com

SIP Domain: pbx.zadarma.com

TTL (Registration interval): 300

Use Domain to Register: check this box

2. If you encounter problems with incoming calls open the "Advanced" page and switch on STUN server.

STUN Server IP/Domain: stun.zadarma.com