D-Link DVG-5004S/D-Link DVG-5008S setup

1. To enter gateway's web interface enter the device's IP-address in the URL bar. PC should be connected to gateway's LAN port. Default IP address is 192.168.8.254

You can attain the device's IP address by dialing **#101

By default no login and password are set

Open "General Settings" tab "SIP" and enter the following data:

FXS Representative Number: Your sip number (for example 111111) from personal account

FXS Representative Number: Your internal PBX number (for example 1234-100) from personal account

Register: put check

User ID / Account: Your sip number (for example 111111) from personal account

Password: Your password of sip number from "SIP Connection" in personal account.

Confirm Password: Your password of sip number from "SIP Connection" in personal account.

Proxy Server IP / Domain: sip.zadarma.com

Proxy Server Realm: sip.zadarma.com

User ID / Account: Your internal PBX number (for example 1234-100) from personal account

Password: Your password of internal PBX number from personal account

Confirm Password: Your password of internal PBX number from personal account

Proxy Server IP / Domain: pbx.zadarma.com

Proxy Server Realm: pbx.zadarma.com

TTL (Registration interval): 300

SIP Domain: sip.zadarma.com

SIP Domain: pbx.zadarma.com

Use Domain to Register: check this box

2. To save changes click "Accept" and then open tab

System Settings - System Operation check box near the following parameters

Save Settings and Restart after that click "Accept"