FreePBX 13 setup manual

Setup guides / FreePBX / FreePBX 13

1. SRV Lookup should be enabled in the FreePBX:

Go to "Settings", "Asterisk SIP Settings", "Chan SIP Settings".

PBX is not used PBX is used

2. Go to "Connectivity" - "Trunks" and add a SIP trunk.

Specify the name of the trunk and go to the sip settings tab.

Enter the following information:

111111: Your sip number from the personal account

Password: Your sip number password from the "SIP Connection" section in your personal account.

Trunk Name: Zadarma

USER Context: 111111

Register String: 111111:password@sip.zadarma.com/111111

1234-100: Your PBX extension number from your personal account

Password: Your PBX extension number password from your personal account.

Trunk Name: Zadarma

USER Context: 1234-100

Register String: 1234-100:password@pbx.zadarma.com/1234-100

In PEER Details and USER Details enter the following data:


host=sip.zadarma.com
insecure=invite,port
type=friend
fromdomain=sip.zadarma.com
disallow=all
allow=alaw&ulaw
dtmfmode=auto
secret=password 
defaultuser=111111 
fromuser=111111 
qualify=400 
directmedia=no 
nat=force_rport,comedia 



host=pbx.zadarma.com
insecure=invite,port
type=friend
fromdomain=pbx.zadarma.com
disallow=all
allow=alaw&ulaw
dtmfmode=auto
secret=password 
defaultuser=1234-100 
fromuser=1234-100 
qualify=400 
directmedia=no 
nat=force_rport,comedia

3. Go to "Connectivity" - "Inbound Routes" and create an inbound route.

Description Zadarma-in

DID Number: 111111

Description Zadarma-in

DID Number: 1234-100

You can set where the call will be routed to in the "Set Destination" section (it can be routed to a PBX extension number, a call group, an IVR, etc.)

4. Go to "Connectivity", "Outbound Routes" and create an outbound route Zadarma-out.

Route Name Zadarma-out

Route CID 111111

Trunk sequence for matched routes: Zadarma

Route Name Zadarma-out

Route CID 1234-100

Trunk sequence for matched routes: Zadarma

Go to "Dial Patterns that will use this Route", enter a full stop (.) in the blank space indicated as "match pattern". (As displayed by a red arrow in the screenshot below.) . If you skip this stage, you will not be able to make outgoing calls.